Audiophile Inductors and Capacitors

We are offering two lines of premium perfect layer air core inductors ranging from 14, 15, 18 and 20 gauge to an
economy 20 gauge nylon bobbin inductor. The Jantzen Perfect Layer 14 Gauge or Perfect Layer 18 Gauge
air core inductors also feature perfect layer air core construction that virtually ensures no saturation, hysteresis,
or other magnetic distortions. Made in the U.S.A. The Standard Line air core, nylon bobbin inductors are a lower
cost alternative for less mission critical” designs or compensation circuits. They're wound with 20 ga. wire and made
in the U.S.A.line has low dc resistance and features perfect layer air core construction and the special Jantzen
high-temperature baking process. This is claimed to eliminate saturation distortion.

The Jantzen Cross-Coils are the ultimate, audiophile-grade inductors. They feature 99.99% pure copper foil
windings separated by an extremely thin layer of polypropylene film and tightly wrapped around a hardwood
core. The foil approach is claimed to outperform traditional perfect layer wire-wound coils with over 12 times
the surface area, minimizing skin-effect problems and providing consistently low distortion. This technology is
widely acknowledged to be very close to the "ideal" inductor.

The new Jantzen 14 ga C-Coil Toroidal Inductors, are specially engineered for bass, sub-woofer and amplifiers.
These inductors utilize a toroidal iron core design providing extremely low resistance and high power handling.
The core is epoxy coated to secure against short circuit even at very high load. Power handling is massive at 700
watts RMS, making them perfect for high power passive crossovers.

The Erse Super Q Inductor Line has characteristics claimed by the manufacturer to practically match any air core coil
from 0-3000 cycles but with much lower dc resistance. They are made in the U.S.A.
The 18 Gauge High Grade Laminated “I” Core Inductors are a lower cost alternative to the Erse for providing
large inductance values with low DC resistance and efficient power transfer.

Choose from an embarrassment of capacitor riches! Audio Cap Theta Poly Film, Kimber Kap Metallized Polypropylene,
Solen Metallized Polypropylene, Jantzen CrossCaps, will fulfill absolutely any requirement. High quality Non-Polarized Electrolytic Caps are useful for impedance compensation Zobel networks, or can be bypassed with a low value poly cap
where a large value is required and an equivalent poly is un-economical or too physically large.

Check out the new addition of the Auricap Metallized Film Capacitors. The Auricap capacitor is considered
by many as one of the finest in the industry. Tension controlled precision winding using high quality metallized film
provides the best possible volume density. 12 gauge stranded leads are constructed of polished high purity oxygen
free copper with XLPE insulation. If high power and acoustic clarity is a must, here is the perfect capacitor.
All values are rated at 400 VDC, 10% tolerance.

If this site meets your needs and has been informative and helpful, please realize that I can only keep it going for both
of our benefits if you continue to make your purchases by clicking through from here to my affiliate partner. Thanks
so much for your patronage.